Who Should Inspect a Crane? It's Not the Dealer's Job.
When the Crane Arrived, Everyone Assumed Someone Else Had Checked It
Last fall our company bought a used mobile crane from a dealer. It showed up at the yard. Visual inspection done. The operator said "looks fine" and signed off. Three days later, handling the first load, the operator noticed a slight drift in one of the hydraulic cylinders under load. Not catastrophic. Not "fine" either.
Then the blame game started. Our side said the dealer should've checked it. The dealer said the manufacturer should've checked it at the factory. The manufacturer said the drift is "within normal tolerance." Who's right? Who's wrong? Does it matter? The schedule got delayed, and nobody came out of that argument satisfied.
So. Who should inspect a crane?
Every dealer gives you a different answer. Most imply "definitely someone else."
What Factory Inspection Reports Don't Tell You
This is the most common misunderstanding I run into as a quality reviewer: factory inspection and incoming acceptance are not the same thing.
Factory inspection asks: "Was this built to spec?"
Incoming acceptance asks: "Is this right for our specific application?"
Take the Sunward 90 excavator. Solid 9-ton machine, tight tail swing, good for confined sites. According to publicly listed dealer pricing as of early 2025, a new 9-ton class excavator runs roughly $50,000 to $65,000 for a base configuration, $65,000 to $85,000 with attachments and quick couplers. That's a rough reference—actual pricing varies a lot by region and spec. But here's what matters from a QA standpoint: the quoted price includes factory inspection. It does not include your acceptance inspection.
If you're sourcing through a Sunward excavator Russia dealer, that machine passed the standard factory checks. That doesn't mean the dealer verified the details of your specific configuration—whether the hydraulic flow matches the attachment you run most often, whether the swing motor is tuned for your working conditions.
Most buyers think "the dealer checked it." The dealer checked what they were selling you. Not what you actually needed.
Here's something vendors won't tell you: in my experience, factory inspection reports cover maybe 40% of what incoming acceptance should look at. They verify the product was built correctly. They don't verify the product will work correctly for your situation.
Smaller Orders Get Fewer Checks—But the Same Risk
Small contractors tell me the same thing all the time: "We're a small order, they're not going to spend time checking our stuff."
That's the problem. And it's structural.
Small orders get the least attention in supplier quality queues. Big distributors get VIP treatment. Large accounts get dedicated teams. Small orders? Maybe a quick visual pass if production has a slow day.
I learned this one the hard way. In my early years I made the classic rookie mistake: I assumed a reliable supplier meant we didn't need to inspect smaller orders. We ordered fifty DeWalt drill units for our maintenance team as a tool kit refresh. Not a huge spend. I didn't think much about it. Three of the fifty switches were dead on arrival. Took two weeks to sort out replacements. The cost wasn't just the switches—it was the downtime from disrupted maintenance schedules.
We're not alone. A garbage truck fleet operator I spoke with had the same experience. They ordered a batch of hydraulic seals for annual maintenance. Five years with the same supplier, no spot checks. Two months later, the first trucks started leaking. Four shipments had already gone out, all with the same batch of defective material mixed in.
The worst part? The supplier wasn't malicious. They just didn't check. And nobody corrected it, because everyone assumed it was someone else's job.
"Who Should Inspect a Crane?" The Answer Is Usually "Nobody"
If you search for "who should inspect a crane?" you'll get a pile of answers: manufacturer, dealer, third party, end user. Someone always adds: "it depends."
That answer is useless.
Because "it depends" translates to "nobody's accountable."
People think inspection is about "finding problems." It's not. Inspection is about "setting standards." Once you have standards, who does the checking matters less, because the standards force problems to surface. But if the standards live in someone's head, and that person happens to be on vacation the day your shipment lands—you get whatever inspection the dealer feels like giving you.
And here's a counterintuitive thing: many buyers assume cheaper equipment carries higher risk. My experience is the opposite. Cheap equipment often has simpler acceptance criteria—fewer specs, looser tolerances. Expensive equipment (like a Sunward 90, or a proper crane) is far more complex, which means the inspection criteria need to be finer. If nobody writes them down... defects slip through.
FTC advertising guidelines require manufacturers to have substantiation for performance claims (rated load, operating weight, etc.). That doesn't mean your specific dealer actually verified anything. A dealer can print a beautiful spec sheet and still skip the load distribution check at the factory loading dock. Those two facts don't conflict.
And to be clear—I'm not a hydraulic engineer. I can't tell you exactly what caused that cylinder drift in our crane. What I can tell you from a quality management perspective is this: signing off without standards—that's the real problem.
Four Rules, No Matter What You're Buying
Whatever you buy, the inspection job lands on you. Even if you've got Sunward's dealer network and Russia-side support behind you.
We've been running a protocol since 2022. Four things, that's it:
1. Write your acceptance criteria down. Not "does it look okay." Actual numbers: hydraulic pressure, load test results, part number matches. On paper, from day one.
2. Don't expect the dealer to do your incoming inspection. Their job is selling. Your job is receiving. This isn't about trust. It's about boundaries.
3. Spot-check every order, no matter how small. Instead of inspecting all fifty small parts, randomly pick ten, document the results, keep the records. Ten clean means a signal. One bad in ten means you check the whole batch.
4. Treat every inspection as an iteration. Our protocol has been revised four times since 2022. Every time a defect slipped through, that criterion went into the checklist. You might think the checklist just keeps growing. It doesn't—we've removed items too, because design updates meant parts stopped failing the same way.
Small doesn't mean unimportant. It means potential. How you treat a small order today determines whether you get the big one tomorrow.
If you're running a fleet, managing a site, or just trying to keep a new machine from going into the shop on day three—you're the inspector. The dealer sold you a promise. Go verify whether it's worth anything.
(Believe me, I'd love to tell you I've got this all figured out. Honestly, I learned most of it from buying too many "inspected" machines. The process is still messy. At least now it's messy with a paper trail.)